Home page | Contact us
     
 
BAR DRILLED THERMOWELLS
Next »
     

For pressures higher than 3,5 Kg./cm2, drilled covers are the ideal protection for thermometers and thermocouples, specially in pipes and tanks.

These covers have been studied and tested hydraulically at a pressure of 105 kg/cm2

They have a polished and mirror-like finish to offer a minimum resistance to the flowing fluid and a maximum resistance to corrosion ans abrasion.

Commonly used materials are: carbon steel, stainless steel in all its range, refractory steel, high alloys, Monel, Inconel, Incoloy, Hastelloy, Nickel, Aluminum, Brass, chromed Brass, etc.

For other special materials, dimensions and executions, we request you to specify them in your inquiries.

 
DRILL LENGTH up to 2.000 mm.
CONSULT FOR BIGGER DIMENSIONS
 
     
 

Maximum deviation in extreme at 2000 mm.
0,2mm = 0,01%

 
     
Excentricity 0.3m/m MAXIMUM in all its length
(GARANTIZED WITH OUR DETECTOR, DMS-5 Krautkramer)
     
EPCO Sistemas © 2003 epco@epcosistemas.com